Pages

Showing posts with label plying. Show all posts
Showing posts with label plying. Show all posts

October 31, 2018

I'm back

October has been a write-off month for getting personal projects done.   The guild found a new studio so it seems like everything was about getting the space finalized, the equipment moved in and organized.   We met with the building owner both productively and unproductively.  We had two moving days, one where we got a few of the looms in and the second where the movers came and brought the library, shelves, the 12 and 8 shaft looms, reeds, shuttles and what I've now come to realize is enough heddles to supply several generations of weavers.  It seems like I've had little time to finish up my own projects in between.

Not to say I got nothing done.   I wound a warp.   I dressed the loom.  I re-threaded the last 1/3 of the threads a second time.  I re-threaded the last 60 threads 2 more times.   I finally added 3 repair heddles and was done with it.    It is the project for my September guild challenge, where we brought in 50 g of thread or fibre and pulled someone else's out of the hat.   I got a partial spool of 2/8 cotton in a light gold colour that was handed over by Kathryn with the comment that she hated that colour.   This is what I've done with the colour.  I didn't have enough thread to do stripes on both sides though.

 I finished spinning the blue and plying the multi-coloured singles for the blue marled yarn.   There are almost 600 yards here.  There is way more than enough yarn for a pair of socks here, so now I'm not sure what to do with it all.   It seems a waste to pull 200 yards out of it for socks and then not have enough for a larger project.  Then again, I don't like knitting shawlettes or scarves, which would use the full amount.   I guess I need to see about a possible weaving project.  That would eat it up pretty quickly.


I have some tow linen on the wheel.   It's not advertised as such, but that is what it is.  It is some special linen roving or sliver.   However, it is made with shorter bits.  So far the longest strands are maybe 10 inches long.  Most are between 6 and 8 inches.  There is lots of short stuff too, fuzzy bits about 2 inches more and definitely less.  It's strong thread, needing scissors to cut it rather than just being able to break the thread with your hands.   There seems to be a limit as to how fine I can spin it as well, so I might just keep this as singles and use it that way.   It's a bit fuzzy because I didn't bother to spin it wet. It's so processed that I found it didn't really make a difference either way, so it was easier to not wet it, than to do so.

It's Hallowe'en, Apparently we don't need the apostrophe any more and spell check doesn't like it with it.  I didn't even have time to put together a costume this year.  Oh well, more time to work on it for next.    I did get an 1830's hat pattern from Westfield so that I could try making one or two over the winter.   There is definitely a shortage of hats from that era in the costume department.


October 09, 2018

Eeek how time flies

A perfect gluten free and dairy free pumpkin pie.  The crust turned out to be quite easy to work with, unlike my previous attempts at gluten free pie crust.   The pumpkin was one I processed myself and the whole pie turned out to be not overly sweet with a tender crust which wasn't soggy or gritty.    It was absolutely delicious.   It was pretty too!

 The navy and brightly coloured yarn plied together.   This is the partial bobbin that I'd spun up as a tester.  I'm still spinning the rest of the navy for the full bobbin.   It definitely subdued the bright colours, but since I was worried about muddying the colours up when they were plied, this is definitely not muddy!  I rather like this combination of colours, even though I'm not always a huge fan of marled yarns.
I had just about 100 g of superwash merino left in the bag.  I tossed it in the pot with some brown, blue and black dye.    I'm really happy with this bit of fibre.  I like the more subdued colours in this batch.  It's a bit of a change from the bright colours I often use.  I used weak acid dyes, with a low immersion technique.





It's been crazy busy here.  Some days I didn't even get a chance to practice the banjo because it felt like I was hardly home.   The grey, wet weather has been putting a damper on things too, as it's been delaying projects.


I made this hat.  I need to needle felt some decorations for it.  I made a second hat in a different style, without the brim, which is going to get some embroidery on it, if I get the time.

January 17, 2018

Banjo strap details and hoar frost

With the inkle strap off the loom, I've been playing around with ways to turn it into a banjo strap.  The ends need to clip or tie onto the brackets around the outside edge.  With the commercial strap I have for the resonator banjo, I'd noticed the snap clips were starting to scratch and dent the wood and finish where the two met.  I switched them out for boot laces, which are quiet, hold the banjo securely and look okay.

I'd decided on leather ends as we have some veg. tanned leather sitting around from a previous project.   I could get Chicago screws locally but only in silver/chrome and I couldn't find the slider or strap end loops in silver.  I tried them anyway, but they look wrong, one went in crooked and I put them in backward,so the screw end was on the outside.   If I didn't need the hardware for the strap, the colour would be fine but I didn't like the look of them.   I found a packet of snap rivets in the leather tool box, which looked great but were too long.   I ended up ordering some from a eather supply place, in two colours, both a little bit too long, but workable.    I installed one on a scrap and it worked perfectly.   I got the holes slightly uneven on the second try, but the third was a charm.  I have two strap ends which look pretty much the same.  Yay me!
I wish I had some brown leather dye, but these will work just fine. I still need to get or make laces and decide where the lace holes need to be punched.

I finished spinning and plying the pink and blue superwash roving which I'd found in my stash.   The colours ranged from dark blue to a fairly light pink.  I rather like the colour progression in this.   I just split the strip of roving down the centre to spin two singles and hoped they'd sort of match while plying.   I knew that with the random placement of colours, it might not happen, but it happened enough to not muddy up the colours too much.


Our weather has been so variable lately.  We've had record highs and record lows within days of each other.  Then one morning, I looked outside a little too early, and there was hoar frost.  The whole world sparkled as the sun rose.   I grabbed my camera and started taking random shots, first while the early morning was still foggy and then as the fog lifted.   It only lasted a short while before the skies became grey again, but it was lovely while we had the glorious sunshine and blue skies.  Usually our winter skies, even when it's sunny are pale, watery colours in various shades of grey.